SVC on Twitter    SVC on Facebook    SVC on LinkedIn

 

Q & A: Hanging a 42-inch Plasma Display

There are two ways to safely mount displays to these types of walls.

Q: I need to hang a 42-inch plasma display on a wall using a cantilevered mount. The wall is 5/8-inch sheetrock on metal studs. How can I be sure it will safely support the weight of the display (66 pounds)?

A: There are two ways to safely mount displays to these types of walls. 1) Locate the studs and pre-drill the holes to fit heavy-duty molly fittings. The weight class of the mollies needs to be greater than the display weight. Making sure the molly goes into the stud will ensure a safe installation. Do not use the screw type as these may pull out. 2) The best way is to remove the sheetrock from the area of the mount, install wood studs inside the metal studs, and then install a back-up plate of either 1/8-inch or heavier metal, or 1/2-inch-thick plywood. The wall can be patched with joint compound to match the existing wall. Mark the mount holes and install the mount. Either way will work well and safely.

–Bob Turner, CTS, sales support engineer, Electrograph, Hauppauge, NY

Next month's question: What kind of cable should be used for digital audio networking systems? I want to run the audio throughout a building that already has extra Cat5 UTP throughout and would like to use these existing cables.

Send your responses to proav@ascendmedia.com. If you have a question you'd like your AV colleagues to answer, send it to the same email account. If we use your question, we'll send you a cool Pro AV gift.

 


Browse Back Issues
BROWSE ISSUES
  June 2014 Sound & Video Contractor Cover May 2014 Sound & Video Contractor Cover April 2014 Sound & Video Contractor Cover March 2014 Sound & Video Contractor Cover February 2014 Sound & Video Contractor Cover January 2014 Sound & Video Contractor Cover  
June 2014 May 2014 April 2014 March 2014 February 2014 January 2014