Bennett Liles" />

SVC on Twitter    SVC on Facebook    SVC on LinkedIn

 

Sound in the Glass Thorncrown Chapel, Part 1

Feb 6, 2014 10:51 AM, With Bennett Liles


   Follow us on Twitter    

Yeah, no pressure there coming into an environment like that. I guess they were pretty well gun-shy on people telling them they had the great solution and then having it not work quite as advertised. So that’s what you were confronted with when you came in, a little skepticism?

Robert: Yes. They were a little skeptical, but also encouraged that we were willing to step in. We did a demo for them and we set speakers at the approximate location of where they would finally rest and the demo went real well. In fact, I remember one of the – was she the owner?

Mark: She was the pastor’s mother.

Robert: The pastor’s mother, yeah.

Mark: The wife of the original builder.

Robert: Right, the wife of the original builder. She said that’s the first time that she could hear, that she could understand the speaking in the very last row ever. So the demo went real well. [Timestamp: 4:31]

You can describe it all day long but then there’s no substitute for actually hearing the sound system work but once they hear it and it sounds right, they know what they like.

Mark: You bet.

There are a zillion places for sound to bounce off of here and few places to tuck things into and behind. How did you manage to run the wiring and keep all the cabling out of sight?

Robert: Well, there was kind of a little raceway between the two enclosures, but we really didn’t have a choice. We had to use the architectural enclosures that were there in the building and we could not alter them. Fortunately, those enclosures were tall, so we said, you know, we could probably put some Panaray MA’s in there and they should just fit and they did. They just fit. But like I said, during the demo we proved that the system would work, and so after they heard it, they were really excited because they have a traditional service and they use playback tracks – and they also have piano and acoustic guitar. And those speaker locations are right behind the podium. [Timestamp: 5:43]

That could be a good and bad thing for running wiring because while you’ve got to stick with the raceways that were there and your options on where it goes would be pretty limited, it probably saved a lot of time as well.

Robert: Yeah, it sure did. All in all I think it took us three days, I believe, to complete the install and then it took – a couple of hours it took for dial up. I used EASERA and DPA sim microphones. We ran some MLS pink noise and gradually tuned that in. It didn’t require that much. Of course we used Bose’s software package to address the immediate speaker set ups and then we fine tuned it with EASERA. [Timestamp: 6:33]

Why did you choose the Bose Panaray MA12EX system for this one? Was it the features or were you already pretty familiar with how that system works?

Robert: Yes, we’ve experienced those speakers before and we know the benefit that they bring; the fact that they are great at rejecting feedback and also are going to put sound where we want sound. So it was, you know, as a line array it really worked well in there. [Timestamp: 7:03]

Yeah, I guess when you walk into a project as challenging as this one you don’t want to be bringing in a system you don’t already know the ins and outs of. That could be pretty deadly.

Robert: Absolutely. You want to remove all the variables that you can.

Had you already seen Thorncrown Chapel when they call you into the project or was it kind of a surprise when you saw it? What was the first thing you did when you got in there?

Robert: Well we knew of it. We had seen the building before. But, you know, it’s another thing to get in there and actually get to run tests and get to actually hear what’s going to happen inside the building. [Timestamp: 7:37]

And of course they’re run by the PowerMatch PM8500 amplifier. Where did you stash that? Obviously it can’t be out in the open somewhere.

Robert: We put it in the same enclosure; on the backside of that architectural enclosure as well as an analog mixer for them to plug in instruments and whatever they need to use. [Timestamp: 8:00]

I guess the PM8500 is a good amp in case you ran into anything unexpected because I think it’s fairly configurable. You’ve got an expansion slot in there for different inputs, you’ve got onboard DSP and you guys knew about all of that.

Robert: Yes. We have used that. We used that on a performing arts center. We’ve used several of those amplifiers and they’re fantastic. You can go in and configure that amplifier in a number of different ways, so if you run into a situation where you need to snag – or you need more amplification, you can immediately V-bridge the amplifier. You can convert it to a 70-volt amplifier if you need a channel that’s 70-volt. It’s very versatile and we’ve been very happy with 8500n’s.

Well, keeping on the safe side with what you know and what you’ve worked with before is the smart way to go. Thanks guys, for telling us about it. Robert Coggins and Mark LaBouff from FBP Systems and the Thorncrown Chapel. See you in part two.

Mark: You bet.



Acceptable Use Policy
blog comments powered by Disqus

Browse Back Issues
BROWSE ISSUES
  November 2014 Sound & Video Contractor Cover October 2014 Sound & Video Contractor Cover September 2014 Sound & Video Contractor Cover August 2014 Sound & Video Contractor Cover July 2014 Sound & Video Contractor Cover June 2014 Sound & Video Contractor Cover  
November 2014 October 2014 September 2014 August 2014 July 2014 June 2014