SVC on Twitter    SVC on Facebook    SVC on LinkedIn

Related Articles

 

Small Auditorium Sound, Part 1

Jun 4, 2012 2:58 PM


   Follow us on Twitter    

Had you used L-Acoustics systems or components before?

Bob: I’ve been familiar with L-Acoustics for several years even with my previous employer so when I got to RCI a few years ago I was pretty much up on the product and what was going on and had a relationship with those guys so this was a good fit. [Timestamp: 3:16]

OK now they were doing a complete renovation so did you have any production or things scheduled that you had to sort of squeeze in between to get this one done?

Gene: Well, we sure did and because we have a production background we were able to anticipate that and the only headache we had was having to ground stack it between the time the I-beams were put in. [Timestamp: 3:38]

In a renovation project of this size you can get everything waiting on something else of course, if things aren’t done in the right order.

Bob: Well that does happen and—but we were, like I said, Gene had said we’re pretty well versed in production requirements and between our experience and the local production staff we were able to navigate through construction rather well. They didn’t have any real hiccups in any of their production that they had put together during the renovation process so it did go rather smoothly. [Timestamp: 4:07]

Now the Cramton Auditorium’s been around for a good while. How are the acoustics in there? Were there any acoustical issues to deal with?

Bob: No there really weren’t any acoustical challenges in this project. I think the main thing was were sight lines that we had to deal with which is usually an issue in a theater and our main focus with this particular situation was to make sure that we had the direct energy on the seats and we were able to basically steer the energy off the walls with the L-Acoustics product. [Timestamp: 4:36]

Were there any architectural modifications you had to do to support the equipment or any kind of rigging challenges or anything like that?

Gene: Oh, there were absolutely—we had, we didn’t have any kind of structural steel to fly this rig off of so when we did the initial modeling in Soundvision I was able to pull the mechanicals off of that and we had to work with the structural engineer and they had to actually install steel above the ceiling and all those modifications had to be done through the structural engineers, signed off obviously before we could load them. But we just worked real well with the structural engineer on this. [Timestamp: 5:12]

Well at least that way you know exactly what’s there.

Gene: Oh most definitely. I mean the structural engineer was on site for elevators and everything else for the inspections during the construction phase so it really wasn’t a problem. [Timestamp: 5:35]

And the L-Acoustics gear. What particular model was this, the Kudo system?

Gene: Yes. This was the Kudo boxes. [Timestamp: 5:30]

OK now how do you adjust the mid and high frequency directivity on the Kudo boxes, since you had to make those adjustments. How did you do that on those?

Gene: Well on the Kudo, it primarily has the louvers so when you do the modeling in the L-Acoustics Soundvision software you’re able to model it with the louvers in various positions so the louvers were an integral part in keeping that energy off the walls so it worked out real well in this situation. [Timestamp: 5:56]

And you just take the information from the software app and set everything?

Gene: Once you do the model you know what the position of each louver in the box should be so you just set them right on the ground and as they go up you pin them and you’re done. It’s rather painless. [Timestamp: 6:12]

And the system in that particular venue has to be ready for just about anything. But it sounds like it went OK in fact you guys make it sound almost like it was too easy.

Gene: I wouldn’t say too easy but you know, you have your days but all in all it turned out extremely well. [Timestamp: 6:27]

Well, in part two we’ll get into some of the other L-Acoustics gear you installed but I appreciate your being here for Part 1. Bob Capotosto and Gene Ingham from RCI Systems. A great installation job at Howard University’s Cramton Auditorium and we’ll talk more about it in part two.

Thanks for joining us for the SVC Podcast with Bob Capotosto and Gene Ingham of RCI Systems. Show notes can be found on the website of Sound & Video Contractor Magazine at svconline.com. In part two, Bob and Gene get into how they used the L-Acoustics 8XTi enclosures and SB28 subs, next time on the SVC Podcast.



Acceptable Use Policy
blog comments powered by Disqus

Browse Back Issues
BROWSE ISSUES
  September 2014 Sound & Video Contractor Cover August 2014 Sound & Video Contractor Cover July 2014 Sound & Video Contractor Cover June 2014 Sound & Video Contractor Cover May 2014 Sound & Video Contractor Cover April 2014 Sound & Video Contractor Cover  
September 2014 August 2014 July 2014 June 2014 May 2014 April 2014