Bennett Liles" />

SVC on Twitter    SVC on Facebook    SVC on LinkedIn

Related Articles

 

Technology Furniture

Jul 14, 2014 12:05 PM, By Bennett Liles


   Follow us on Twitter    

Despite the wonders of today’s tech gear, its functionality depends a great deal on how it is set up to interface with the humans who operate it. The technology furniture that is selected and how it is itself configured and installed plays a huge role in the quality of the experience. Multiply a few awkward reaches or bends of the body against the number of times they occur, and a few inches of height or width in the right place can make all the difference. As with the tech gear itself, good planning and proper selection of the housing and mounting is paramount. The examples below not only provide organization and operator comfort. They also add a substantial coolness factor.

Altinex TNP528S

Altinex TNP528S

To handily bridge the transition from analog to digital, the TNP528S factory-wired Tilt’n Plug interconnect panel from Altinex has twin HDMI and VGA connections along with two U.S. power connectors (12A), two 3.5mm mini audio, two RJ-45 Ethernet jacks, and a USB type A input connector. The panel top lines up nearly flush with a table or podium surface. With a slight push, the panel tilts up smoothly to reveal the connectors, each of which is passive and has a 6ft. cable passing through the bottom of the unit. Pushing the panel down locks it into the hidden position. The standard finish is black matte; mirror finish bezels and custom finishes are available.

Anthro eNook Standard

Anthro eNook Standard

A wall-mounted solution to a compact workspace, the eNook Standard has a tilt-out desk surface that can be adjusted for different height settings. When the desk surface is flipped down, it reveals a fabric back panel that can be used as a bulletin board, or the same space can be fitted with height adjustable shelves to hold small objects. The steel frame unit has two locking doors, a six-outlet surge protector, cable clips, and an inner metal tray. Anthro designed it to be a perfect stand-up laptop station, and when closed, it only extends 7in. from the wall. The bottom area provides uncluttered room for cables and connectors while the flip-down desktop has locking doors.

Argosy Console Eclipse

Argosy Console Eclipse

Designed and engineered by Argosy Console to accommodate a variety of control surfaces or consoles, the Eclipse furniture system allows musical artists and sound engineers to create, and later expand, the console to adapt to their needs. Desk space or easily accessible 19in. rack space may be integrated on either end to create an elegant and inspiring centerpiece to the studio. Using a modular and expandable aluminum rail system, the Argosy Eclipse allows clients to update their system without completely replacing their technical furniture solution. For consistent comfort during long sessions, the desk and rack sections are fitted with padded armrests.

Atlas Sound WMA16-19-HR 16RU WMA Half Rack

Atlas Sound WMA16-19-HR 16RU WMA Half Rack

The WMA16-19-HR 16RU WMA half rack from Atlas Sound is a wall-mounted equipment enclosure for tight spaces where access to components would normally be very difficult. Its ingenious swing-down mechanism puts the rear side of the equipment within easy reach. This model’s front 12-gauge adjustable CRS rack rails are finished with black Zinc plating and tapped at 10-32. The rack can be fitted with the optional EFP3-HR fan unit for additional ventilation. The WMA16-19-HR is constructed of 16-guage CRS and finished in a black electrostatic powder coat. On the sides, there are four sets of mount points for industry-standard 119mm fans. Each cabinet comes with 100 black 10-32 rack screws.

Avteq Technology Credenza3-V/L

Avteq Technology Credenza3-V/L

Avteq has a presentation and conferencing solution in the Technology Credenza3-V/L that can be custom finished in veneer or laminate to match any room décor. The top of the credenza can support up to a single 103in. or twin 80in. flatpanel displays with an integrated universal screen mounting system. To accommodate additional equipment, it includes a sliding and rotating 12RU rack on one end. There is a six-port rack-mounted power strip and surge protector. The open-back design allows for plenty of ventilation for the powered gear inside, and for videoconferencing, there is an integrated camera-mounting platform that is adjustable for best eye contact. For the ultimate in customization, the unit can also be ordered as a steel-frame skeleton with accompanying CAD drawings.



Acceptable Use Policy
blog comments powered by Disqus

Browse Back Issues
BROWSE ISSUES
  June 2014 Sound & Video Contractor Cover May 2014 Sound & Video Contractor Cover April 2014 Sound & Video Contractor Cover March 2014 Sound & Video Contractor Cover February 2014 Sound & Video Contractor Cover January 2014 Sound & Video Contractor Cover  
June 2014 May 2014 April 2014 March 2014 February 2014 January 2014