SVC on Twitter    SVC on Facebook    SVC on LinkedIn

Related Articles


Audio Review: Barix Technology Instreamer 100, Exstreamer 100, and Annuncicom 100

Feb 1, 2009 12:00 PM, By John McJunkin

Trio of audio-over-IP devices sport practical design and easy setup.

   Follow us on Twitter    

Barix Technology Annuncicom 100

Barix Technology Annuncicom 100

There are myriad applications for audio-over-IP devices — virtually any application in which audio must be distributed or otherwise transmitted can benefit from the use of computer-networked audio. Switzerland's Barix Technology — with U.S. headquarters in St. Paul, Minn. — makes a suite of audio-over-IP products that tout commercial, industrial, and security applications such as multizone audio distribution for retail, hospitality, and broadcast. More specifically, these devices can be used to provide audio for malls, grocery stores, educational institutions, and stadiums, and in broadcast applications. Although I won't cover it in detail, one other specific application that excites me (as a podcast producer) is the notion of recording podcast content remotely. Barix's marketing information proudly tells of the use of these units in a university setting for this purpose. I spent time with three of Barix's products: the Instreamer 100, the Exstreamer 100, and the Annuncicom 100.

The Instreamer 100 is a network audio encoder for commercial, industrial, and security applications that converts your audio into a data stream that can be received and reproduced anywhere you'd like. The unit can stream in the MP3 (variable bit rate up to 192kbps), G.711 (µLaw/aLaw, 8kHz or 24kHz), and PCM (16-bit/8kHz or 24kHz) formats. The Exstreamer 100 is the other end of the pipe — a network audio decoder for the same applications. This device receives and plays any MP3 stream, not just those created by its Instreamer counterpart. Shoutcast, Icecast, and RTP server streams are supported as well. With separate firmware, WMA streaming is also available. Additionally, the Exstreamer features a USB slot on its front panel for playback from memory sticks. The Annuncicom 100 is a network intercom and PA system component intended for integration with the Instreamer and Exstreamer products. It transmits signals such as voice, alarms, prerecorded announcements, and music via the network to specific locations. It also facilitates paging and intercom functionality for commercial and public buildings — Barix specifies “airports, shopping malls, and remote facilities such as store chains.” In addition to facilitating live announcements by passing audio over IP, the Annuncicom facilitates relay closure for control of a door lock or some other mechanical device or indicator. This is primarily intended to facilitate a door-intercom-style application, but it could be used to accomplish any number of similar applications.

The physical containers of these Barix devices are not sexy in the sleek lines and sublime color scheme sense of the word, but their bright, practical aluminum cases are attractive in their own utilitarian way. The Instreamer 100's front panel has a recessed reset button that returns the box to its factory settings, an RS-232 port, an infrared output, headphone jacks, and two status LEDs. The rear panel features the unit's LAN connection, coaxial and optical S/PDIF connections, stereo RCA inputs, and power jack. This box is simple because it's largely controlled via the network. Similarly, the Exstreamer 100's front panel has a recessed reset button, a USB port, two status LEDs, and a headphone jack. Its rear panel has stereo RCA outputs, RS-232 and LAN ports, and a power jack. The Annuncicom 100's front panel has a recessed reset button, an RS-232/485 port, a USB port, a mic mini jack, a monophonic RCA input and output, and two status LEDs. Its rear panel features screw terminal blocks for audio and control signal I/O, a LAN port, and power jacks. These cases are small: 4.25"×1.5"×3.1" for the Instreamer and Exstreamer, and 4.25"×1.5"×4.92" for the Annuncicom. The cases are all slotted for ganged installation.

Following the supplied instructions, I plugged the Instreamer 100 into my LAN router with a Cat-5 cable. Then, with headphones plugged into the headphone jack of the unit, I plugged in the power cable. After a moment, I heard a voice in my headphones reading the IP address that the unit had found and established as its own. This is a powerful feature, and it's welcome to a person such as me who does not care much to delve into LANs, WANs, IP addresses, and other network-related stuff. I wrote down the IP address and pointed my browser to it, which immediately brought the Instreamer's web interface to my computer screen. This interface facilitates the configuration of network, audio, streaming, I/O, control, serial port, and security parameters. Similarly, the Exstreamer's network, streaming, play, remote, advanced, and security parameters are controlled via a web interface, as are the network, audio, streaming, I/O, control, serial, and security parameters of the Annuncicom 100. In recent years, I've warmed to the notion of controlling devices via a web interface, and it's largely due to the well-planned graphical user interfaces developed by companies such as Barix. These units can be controlled by computers, web pads, PDAs, or any other web-enabled device. Another nicety: IR-enabled devices can be remotely controlled over the network with an optional stick-on transmitter.

Acceptable Use Policy
blog comments powered by Disqus

Browse Back Issues
  January 2015 Sound & Video Contractor Cover December 2014 Sound & Video Contractor Cover November 2014 Sound & Video Contractor Cover October 2014 Sound & Video Contractor Cover September 2014 Sound & Video Contractor Cover August 2014 Sound & Video Contractor Cover  
January 2015 December 2014 November 2014 October 2014 September 2014 August 2014