Bennett Liles" />

SVC on Twitter    SVC on Facebook    SVC on LinkedIn

Related Articles

 

Maximizing the Worship Space, Part 1

Jan 13, 2014 2:58 PM, With Bennett Liles


   Follow us on Twitter    

And the stage looks pretty wide. How do they do the stage monitoring? Do they feed that out of an aux on the main house mixer or do they have a separate monitor mixer somewhere or have they got it set up for the performers to do their own monitors?

Brent: They have Avioms for the band, so they have the ability for some conventional wedges because there are times when they need them. But for the most part, everybody’s on in-ears. There are still a couple of hot spots for the orchestra, and some conventional wedges for the choir, some hidden side fills feed them, but other than that, they try to keep the stage volume down as low as possible. [Timestamp: 4:54]

That always seems like a big time saver for the bands and takes a huge load off of the main house sound people. The in-ears keep the stage nice and uncluttered, too.

Brent: They do sound check for both services before the first service, and then in between they do a full switch-over of the bands. They definitely need to save as much time as possible. [Timestamp: 5:12]

That’s got to be something they have to have worked out pretty much in detail, holding a traditional service and then completely shifting gears on the technical setup. I guess that would be to accommodate the older members and then bring mainly the younger people in for the live music worship style.

Brent: I believe you’re correct, yeah.

So you have the Danley speakers, which are passive, and you have the Powersoft amplifiers located somewhere else. Did you put those in an equipment room or a rack nearby?

Brent: The existing sound system had, where those power amps are, which was actually behind front of house.There was obviously some budget concerns when this all got going, and so we were trying to not necessarily reuse, but any place that we could have a cost savings that didn’t affect performance, we went that way. So keeping the amps there, using the Powersoft low power draw, and not having to rewire any circuits, which meant no money going to electricians, so we could put money back into gear and performance. [Timestamp: 6:07]

That looks like there could have been some serious cable runs. Was there a lot of running speaker cabling or did you use the existing system components for that?

Brent: We did replace the cabling to the speakers. The existing cabling was [in] the wrong locations, so we did replace that but we didn’t have to replace amp racks or a lot of power. We were able to reutilize everything they had. [Timestamp: 6:29]

One of the more serious and time-consuming things that can come up with these projects is electrical problems with the existing sound system. Did you run into any re-fits with that or were you able to just power up the new system and go with it?

Brent: We were able to plug it in and go.

Well I know that saved a lot of time and trouble. Chasing ground loops and stuff with an old electrical system can get almost spiritual in itself.

Brent: Yeah, absolutely.

Once you got it up and running and tweaked out, how long did it take to get their people up to speed on running it? Did you have to do any training or did they just pick it up and go?

Aaron: Yeah, it took us three-and-a-half days to commission, mainly because of the complexity of the setup that we used, which was an actual left-right stereo image for actually every seat in the sanctuary, which is difficult to do in a space that size and that shape. In order to do that, we ended up having to split it down into essentially three subsystems. There are technically three left-right pairs of loudspeakers covering the entire seating area, both with a far throw and a down fill array. That took quite a bit of time to get those things all aligned and set up properly. But as far as the acoustics of it, the arrays were, I mean, right off the bat, the Danley loudspeakers are great loudspeakers, so we didn’t really have to spend much time making the speakers themselves sound good. It’s just aligning it time-wise and doing a little bit of EQ to compensate for room reflections and that sort of thing. [Timestamp: 8:00]

I couldn’t really tell from the pictures. Is that place carpeted or is it all a hard floor?

Aaron: It’s carpeting.

Oh, well that makes a huge difference in the acoustics.

Aaron: Yeah, and there was room acoustics that were also treated as well. There was a lot of room acoustic treatment throughout the space, the back wall, the front of the balcony face, the soffit areas up in the ceiling, and the stage sidewalls and everything. Those were all newly treated. [Timestamp: 8:26]

The pictures make it look like a very high ceiling and a long acoustic throw from the main house speakers to the seats.

Aaron: I want to say it was like 60ft. or 70ft., I think, at the farthest spot.

Not all that much.

Aaron: No, which is kind of the big advantage. I mean I want to say since it is semicircular, it’s probably like 100ft. radius, 110ft., something like that, to a point, but the arrays are obviously built further out in the room than where the focal point would be. [Timestamp: 8:56]

Could be a wide angle lens just makes the place look much bigger. Was there anything else you did on the sound system?

Brent: I think the only other big thing on the sound system is that we did put in a cardioid subarray that Aaron designed, and that works pretty darn good, actually. [Timestamp: 9:10]

Big space to cover at the First Free Church and two very different styles of services to make sound right. Brent Hayes from SVL Productions and Aaron Johnson from Johnson AV Engineering. In part two we’ll get into the lighting and video. Thanks for being here to tell us how you made it all happen.



Acceptable Use Policy
blog comments powered by Disqus

Browse Back Issues
BROWSE ISSUES
  October 2014 Sound & Video Contractor Cover September 2014 Sound & Video Contractor Cover August 2014 Sound & Video Contractor Cover July 2014 Sound & Video Contractor Cover June 2014 Sound & Video Contractor Cover May 2014 Sound & Video Contractor Cover  
October 2014 September 2014 August 2014 July 2014 June 2014 May 2014