SVC on Twitter    SVC on Facebook    SVC on LinkedIn

Related Articles

 

Audio-Technica ATM610a & AT2005USB Microphones Review

Jul 13, 2012 3:37 PM, Reviewer: John McJunkin

Two quality mics to fit a range of applications.


   Follow us on Twitter    

Audio-Technica ATM610a

Audio-Technica ATM610a

Recently I handled an upgrade for a government agency client who specified that they’d like a pair of wireless mics to facilitate the telephone transmission and recording of public comment during their conferences. I eventually chose mics with integrated transmitters, but I strongly considered pairing a traditional handheld mic with a plug-in transmitter. In consideration of in-ceiling speakers from which I wanted to wring every last bit of gain before feedback, I decided to specify cardioid mics, possibly even considering super- or hypercardioids to help reduce the potential for feedback. I had heard of Audio-Technica’s new ATM610a hypercardioid and requested one for evaluation.

I was also aware that Audio-Technica (A-T) had introduced a new USB microphone, and having watched in anticipation from the sidelines when the company introduced its first USB mic, I was keen to see what the new mic was all about. I knew that unlike previous A-T USB mics, the AT2005USB offers a traditional XLR output in addition to its USB digital output, but I discovered another pleasant surprise that enhances the functionality of the mic for the application I had in mind. I have clients who want to make recordings of monologues or dialogues in their offices, during conferences, or while on the road at conventions or tradeshows. Carrying a mic, cabling, mixer, and recording medium can get a little unwieldy, so it would be nice to have a simple USB mic that plugs directly into a laptop or other portable USB-appointed device and also facilitates monitoring of the recording in realtime. This mic does that, and if you do need the capacity to plug in via balanced XLR mic cabling to a traditional system, it fits that bill as well. Audio-Technica sent me one of these to evaluate too.

The ATM610a is a traditional handheld microphone, 7in. long and just shy of 2in. in diameter at its widest point—the middle of the metal mesh windscreen surrounding the mic’s dynamic capsule. Audio-Technica employs its multi-stage windscreen with this mic, as the company does with many of its mics now. The principal component of the windscreen is a foam insert that is cut in such a way that the openings into the mic’s phase-shift network are clear, ensuring maximum off-axis phase cancellation and hence, high directionality. Indeed, this mic’s pick-up pattern is limited to 100 degrees, with deep rejection of the acoustical input 180 degrees off axis from the front of the mic. This makes it a good choice for music vocals and for speech. In the specific use I considered, the off-axis rejection is important to avoid feedback from in-ceiling speakers, and since the mics would be used in a free-roaming handheld way, the hypercardioid is the best way to do this. The mic’s users are instructed to hold the mic parallel with the ground, locate the business end of the mic an inch or so off the corner of their mouth, and point it at an angle toward the center of the mouth. This increases proximity effect a little, but it’s easily tamed with just a touch of equalization, and the off-axis rejection all but eliminates feedback.

Regarding frequency response, the manufacturer publishes 40Hz to 16kHz, and without objectively measuring it, this sounds honest to my ear when listening to the mic. Not many human voices have a significant amount of 40Hz energy, so the mic gets where it needs to be in the low end, and the 16kHz top end is certainly sufficient. There is a moderately broad bump of about 6dB centered around 4kHz, which nicely accentuates the intelligibility frequencies, and an additional, smaller bump centered around 12kHz that adds a little “air” to the mic’s output—a pleasant addition that dynamic mics aren’t known to deliver. Otherwise, the rest of the spectrum is flat, smooth, and sounds good. I tend to scoop the mids a bit, and did so with this mic. I was very happy with the results. The mic delivers a good solid signal with no notable self-noise.



Acceptable Use Policy
blog comments powered by Disqus

Browse Back Issues
BROWSE ISSUES
  August 2014 Sound & Video Contractor Cover July 2014 Sound & Video Contractor Cover June 2014 Sound & Video Contractor Cover May 2014 Sound & Video Contractor Cover April 2014 Sound & Video Contractor Cover March 2014 Sound & Video Contractor Cover  
August 2014 July 2014 June 2014 May 2014 April 2014 March 2014