Jun 6, 2013 2:51 PM, By Bennett Liles
JVC has the big, super-high-resolution display market covered with its 84in. PS-840UD 4K LCD monitor, and its 10-bit color depth, 178-degree viewing angle, and Intel OPS (Open Pluggable Specification) compatible rear port. Controllable on RS-232 and Ethernet, the unit has loop-through outputs for these, as well, and it accepts component/composite (shared), PC, and four HDMI 1.3 signals. It takes audio input on 3.5mm mini jack, and outputs this on an identical jack. The screen provides a 178-degree viewing angle with 350 nits brightness, and there is a timing controller included. The PS-840UD weighs about 170lbs. without the stand, and it offers a Kensington lock slot and a 400mmx600mm mounting bolt pattern.
The 42WS50BS-B 42in. IPS LCD has been designed by LG Electronics to be used in stand-alone settings or in videowalls up to 15x15 with its bezel of less than 0.5in. and the loop-through outputs for DVI-D, component, composite, and RGB inputs. The unit also accepts USB, DisplayPort, and HDMI sources. Control is done via Ethernet, as well as RS-232 and IR, with the latter two also looping for daisy-chained control in monitor walls. The display may be operated in landscape and portrait mode with a 178/178-degree viewing angle, brightness of 450 cd/m², and screen resolution of 1920x1080. In addition to the audio input from HDMI, there is a 3.5mm mini input jack and an external speaker output.
The MDT552S LED-backlit LCD monitor from Mitsubishi features a minimum panel depth of 1.8in, a 0.65in. bezel width, and a weight of 63.7 lbs. Two ambient-light sensors automatically adjust brightness to suit environmental conditions. The unit can be controlled remotely through an RS-232 port, and it is compatible with Crestron RoomView and AMX device discovery. The chassis is equipped with an OPS slot to fit a personal computer card. Long-distance signal delivery and daisy-chain connections are enabled with an optional SDI card used with an SDI-compatible BNC cable. It has a pair of built-in 10W speakers and video inputs include composite, S-Video, 15-pin VGA, HDMI, and optional SDI.
Fitted with an OPS-compatible NEC STv2 slot, and capable of DICOM support for medical applications, the NEC Multisync V652 is a 65in. LED-edge-backlit LCD monitor with 1920x1080 resolution. The screen has a brightness figure of 450 cd/m² and the cooling system features an advanced fan control. Other features include PIN theft protection, rapid input switching, a scheduler, screen saver functions, and 10x10 TileMatrix. Input ports can accommodate signals in 15-pin VGA, composite, component, DVI-D, HDMI, and DisplayPort. The unit can be controlled through Ethernet, infrared, and RS-232 (in/out). Audio input and output are on 3.5mm mini jack. Slot-in options include a variety of CPUs and video interface boards.
The TH-80LF50U LED professional display from Panasonic is only 3.5in. deep, and weighs in at 107lbs. Designed primarily for digital signage applications and 24/7 operation, the monitor can show content in landscape or portrait modes, and it includes Slot 2.0 expandability along with LAN and RS-232 control. The NEC STv2 Slot is OPS (Open Pluggable Specification) compatible and it is the standard for various devices as PCs, HD-SDI interfaces, and WIDI receivers. The unit can be part of a 5x5 videowall, and its input ports can accommodate composite, component/RGB on three BNC connectors, HDMI, DVI (in/out), and 15-pin VGA. The monitor provides a screen resolution of 1920x1080 and a viewing angle of 178 degrees. There is also a set of stereo audio inputs on RCA connectors. The unit’s 700cd/m² brightness allows it to be installed in a wide range of ambient light environments and its LED backlighting minimizes power usage.
One of the Planar UltraRes models, the 84in. UR8450MX professional 4K LED-backlit LCD display is designed for high-resolution commercial display applications in team rooms, conference rooms, command centers, and digital signage. The monitor is capable of operating in landscape, portrait, or pedestal modes, with 3840x2160 screen resolution, and 500 nits brightness. Video and still images are displayed with 60Hz refresh rate and 10-bit color, while the automatic failover power supply supports reliable 24/7 operation. The PlanarProfile mounting system provides a 3in. profile (approximately) and allows a lockable front service access mode. Multiple Planar UltraRes Series monitors can be tiled with a very narrow image-to-image profile thanks to the narrow bezel. For minimum environmental impact, the UltraRes Series models are fanless and contain no lead or mercury.
Acceptable Use Policy blog comments powered by Disqus