SVC on Twitter    SVC on Facebook    SVC on LinkedIn

Related Articles


Audio Review: Crown Audio I-Tech I-T12000 HD

Jul 7, 2009 12:00 PM, By John McJunkin

A small amplifier that delivers big power and great signal processing.

   Follow us on Twitter    

Crown Audio I-Tech I-T12000 HD

Amplifiers have become vastly more sophisticated over the years, and I would guess that amp designers from 50 years ago would probably faint if they could climb into a time machine and see what we have today. Recent years have seen the development of amplifiers with onboard digital signal processing and network communication capacity, and these sophisticated amps have become the rule, rather than the exception, in many applications. With Crown Audio’s introduction of the I-Tech HD series, I decided to take a look at the most powerful amp in this series, the I-T12000 HD.

The amp’s front panel features, from left to right, a USB data port and LEDs to indicate (for channel 1) amplifier fault, thermal shutdown, clipping, input or output level (signal present, -20dB, -10dB,) a “ready” LED, and a speed-sensitive rotary encoder controlling channel 1’s level. In the center of the front panel is the amp’s LCD control screen, which displays detailed information about the amplifier’s operation. Below the screen are three buttons: Menu/Exit, Prev, and Next, which are used to navigate through the system menus. To the right of the screen and navigation buttons is the rotary encoder used to control channel 2’s level, followed by a group of channel 2 LED indicators duplicating those associated with channel 1. Finally, the far right side of the front panel has a blue LED to indicate that the amplifier is on and AC power is available, a yellow LED to indicate network data activity, and another yellow LED to indicate bridge mode operation. The top half of the front panel is devoted to cooling vents.

The rear panel of the I-T12000 HD features, from left to right, a three-prong power inlet, a cooling fan, power switch, and an input section. In the upper half of the midsection are the amp’s two balanced XLR analog inputs, along with balanced XLR loop-through outputs. Below the analog inputs is an AES/EBU input and loop-through pair, alongside an EtherCon Ethernet connector for network operation. On each side of the EtherCon connector is an LED, indicating network link/activity and CobraNet node status, respectively. To the immediate left of the AES/EBU input are an LED indicating preset and data status and a reset button that returns the amp to factory defaults. The amp’s unique MAC address is printed below these indicators. To the immediate right of the input section are the amp’s outputs, leading off with a pair of 4-pole Speakon connectors and followed by binding post outputs, which can connect banana plugs, wire, or spade lugs. Finally, on the far right of the amp’s rear panel is a second cooling fan.

The I-T12000 HD that I evaluated lists power ratings as follows: 2Ω dual, 3750W per channel; 4Ω dual, 4500W per channel; 8Ω dual, 2100W per channel; 4Ω bridge, 7500W; and 8Ω bridge, 9000W. Crown states in its specifications that these numbers represent guaranteed minimum power in watts at 20Hz to 20kHz with less than 0.1 percent THD. This is a very healthy dose of power—sometimes I still find myself shocked at the power output available in 2RU amplifiers these days. Aside from the solid and clean power output, this amplifier also offers a pretty substantial suite of available DSP—including 24-bit/192kHz Cirrus Logic A/D and D/A converters and infinite impulse response (IIR) and linear-phase finite impulse response (FIR) filters. Internally, the DSP math is handled with 32-bit, floating-point precision. The CPU’s high-speed capacity indeed facilitates FIR filtering, arriving at vastly less phase incoherency.

The front-panel controls allow attenuation and muting, analog input sensitivity, choice of presets (set up in advance for specific loudspeaker combinations), and choice between dual and bridge mono mode. More advanced DSP operations include the limiting of attenuation amounts (i.e. maximum amount of attenuation that a user can apply), attenuator linking, and choice of inputs with some pretty clever options. Digital and analog inputs can be simultaneously connected, and the digital inputs can be backed up or overridden by analog automatically. The user can also establish maximum analog input at either +21dBu or +15dBu.

Acceptable Use Policy
blog comments powered by Disqus

Browse Back Issues
  January 2015 Sound & Video Contractor Cover December 2014 Sound & Video Contractor Cover November 2014 Sound & Video Contractor Cover October 2014 Sound & Video Contractor Cover September 2014 Sound & Video Contractor Cover August 2014 Sound & Video Contractor Cover  
January 2015 December 2014 November 2014 October 2014 September 2014 August 2014