Theater Acoustics Aboard Oasis of the Seas, Part 1
Jun 14, 2010 12:00 PM
Do they have to specify certain equipment with very definite capabilities in order to suit not only the physical environment, but also to comply with the fact of using minimal construction crew and doing a lot of different things back to back in those theatersfor instance, digital mixers with recallable presets?
Turpin: That’s pretty much a staple for Royal Caribbean. I don’t want to call them early adopters, but they are aggressive adopters of some new technologies that have to do with the particular dynamics they’re working on a shipand I mean physical dynamics, not audio dynamics. Obviously, you get a ton of salt spray; the pool that is in the Aqua Theater is a salt-water pool. Everything that goes out there has to have a substantial IP ratingmost of it’s 56 or 65. And so, you’re looking at a highly weatherproofed arrays. They actually wound up using EV XLDs for the main arrays in the Aqua Theater partly because, as with any space on a ship, you have a very constrained physical location that you have to work in also. I mean, we had these dive towers, and we had to cram a line array inside the fins of the dive tower. Well, there’s only about three or four boxes that will even fit and get the job doneespecially when you’re talking about a narrow dynamic range and a specific pattern control. We would love to say it’s all about getting the absolute best soundand the sound is pretty doggone goodbut sometimes, just as it does in a land-based venue, other factors have to weigh in as to actually what gear you choose. And it may not be exactly the one you wanted to use, but you get something that will get the job done and also fit all those other parameters. [Timestamp: 11:53]
And a lot of this stuff moves around, too, doesn’t it? I mean they’ve got things going up and down and stuff that comes out of the water in the pool and ...
Turpin: Yeah, Handling Specialty did all of the hydraulics for the ship, all the performance hydraulics. There are elevators in the pool so that you can raise them up and have only have an inch of water setting on top of them, and the performers can literally dance on the water. Then the elevators go down so you can dive into that same pool. And they use some interesting things. When they were first designing itI know this is really Fisher Dachs territory, butthey started looking at wave dynamics and the fact that the motion of the ship would actually create some pretty substantial waves potentially in that pool because of the width of the pool. So the elevators had to be designed, and they had to design wave baffles that would keep the level of the pool fairly stable. They used turbulizers to break the surface tension on the water for the divers; that in turn has an effect on what you can hear in the water. You've got a crew underwater in that pool; you have a lot of interesting technical challenges that you don’t really see in most theaters. [Timestamp: 13:03]
Right, yeah; now underwater speakers and water nozzles ...
Turpin: Underwater speakers, because when they’re doing water aquatics, they need to be able to hear both above and below. So there are foldback speakers also mounted inside of the dive towers at both levels of the pool so they can hear on the up-stage portion over the trampoline. And also there are in-pool speakers that allow them to hear when they’re in the water as long as the turbulizers aren’t on; if you turn the turbulizers on, nobody hears anything. All of those little bubbles effectively break the acoustic path through the water. [Timestamp: 13:33]
So they’ve got a lot of stuff to have coordinated, I guess, on these showswith the lights and water nozzles and things in sync?
Turpin: Yeah and it all runs on timecode. [Timestamp: 13:41]
Yeah, all on timecode?
Turpin: Right and on all of that stuff is integrated using Medialon.
And where is all of this controlled? Where is the audio booth for the Aqua Theater?
Turpin: It’s either deck 12 or deck 14.
So it’s way up above the stage.
Turpin: Way up; you’re looking almost straight down on the pool. [Timestamp: 13:56]
Turpin: And obviously, you have no direct audio. You’re relying on your monitors to be able to hear. You’re inside a glassed-in booth. There’s not really any other way to do it; you couldn’t hear even if it was open. And so all the show control is on either side at the top of the balconies, at the top of that stateroom stack on either side above the climbing walls. And there is lighting and water control on one side, and sound and stage management, I think, on the other side. [Timestamp: 14:24]
So what do they got for mixers in there?
Turpin: They actually have two things because the shows, the aquatic shows, run on Wild Tracks using Meyer LCS systems; same thing that’s used quite a bit in Vegas. So there is a Meyer playback console, and then they also have a [Yamaha] DM1000 that they use for the little bit of live audio that they need to do. The choice of the DM1000 is actually mostly driven by commonality with other spaces on the ship because one thing that’s very important when you’re on a cruise ship is interchangeability of equipment. Spares are crucial, and you don’t have any storage; you don’t want to carry the weight. You have to run shows in highly automated mode, and you need to be able to minimize your spares and maximize your interchangeability. So that’s one of the things that drives using the DM up there, because they have others on the ship in other spaces. [Timestamp: 15:14]
And how do they handle stuff like stage monitoring and things for the performers?
Turpin: Well, as we said, there are in-pool speakers for the acrobatics in the water. There are also all-weatherproof surround speakers and there are weatherproof foldback speakers at the two levels of the deck that are primary performer levels up-stage. [Timestamp: 15:33]
Have they got any kind of assisted listening? Some of these people, I guess, are on up in years on these cruises.
Turpin: Yes, and that was an interesting discussion that we had with them. They have a wireless RF-based listening assist available for the Aqua Theater. We usually use infrared-based on the indoor facilities, but you can’t effectively use infrared-based outside during the dayit’s very difficult to do that. And also you’ve got a really very variable environment there where people may be watching from any one of a number of placesit would be very hard to cover that. So whereas you have a more controlled on the indoor theatersand using infrared allows you to contain the signal within the theater and not interfere with other thingsthe only real solution outside was to go to an RF base. [Timestamp: 16:22]
So Russ, I guess you didn’t have to worry too much about feedback then since it’s mostly playback.
Cooper: No, but they do havewhen the live entertainers are there and they raise that deck up with no water, they will do just a regular land-based show, live. [Timestamp: 16:39]
I guess that’s the real name of the game in being able to do anything that’s in that tough environment that you could do in Vegas or anywhere on dry land. So did they have to use any special isolation devices to avoid AC ground loops or having engine or pump vibration getting into the sound or shaking up the equipment?
Cooper: I don’t believe they did; not on the acoustic side.
Turpin: Most of the loudspeakers on the ship are isolation-mounted because one of the things that we’re very concerned about is noise transmissionstructure-borne transmission of the loudspeaker to the hull of the ship. [Timestamp: 17:15]
Turpin: And vice versa…
Cooper: Everything’s on neoprene isolators.
Turpin: Yeah, everything’s on spring hangers or neoprene isolators. Even the little surround speakers are all mounted elastically. But they also have to be fixed, whereas in a land-based theater you might fly in arrayyou might fly a line array on a couple of lines of aircraft cable. No, can’t do that.
Cooper: Can’t do that there.
Turpin: Because that has to be stable and fixed. The ship is moving, and in rough weather, you can’t have stuff wondering around so everything has to be mounted in a fixed manner. And then you have to isolate it so that because it’s fixed it’s not also transmitting and receiving structure-borne noise to and from the ship itself. [Timestamp: 18:00]
And then they’ve gotI guess they have to have production communication. They’ve got an intercom system and everything there?
Turpin: Right, they’ve got an intercom which includes underwater com because the diversyou have crew on scuba gear in the water at the Aqua Theater, and they also have to be on com. They also have breathing loops so that the performers can breath underwater. There’s a breathing line that runs around the perimeter of the pool. [Timestamp: 18:23]
Turpin: Yeah, but you doone advantage that you have is as you embraceyou were talking about isolation, of course. All of the boxes on stage are in weather-tight enclosures where you have connectivity point. There are connections in each of the dive towers to allow them to do some live show. If they want to put a steel band on the barrel roll deck and have daytime entertainment up there, there are connection points that allow them to do that. They’re in weatherproof boxes and they’re inside the dive towers, so they’re as protected as they can be. Same thing with the tech table position, which is out in the seating area. It’s only typically used to tech a show; there’s no reason to mix a show live from there, but you could. But if you connect all of this stuff digitally using fiber and categoric cable, then you have increased your immunities to certain noise problems tremendously. That’s one of the reasons, one of several reasons, that the cruise ships tend to be fairly aggressive adopters of digital technology. Because you had asked me earlier about conduit on the ships, and when I saw that I laughed because there is no conduit on the ship; everything is in cable tray, and that’s anathema to us. When we do land-based theaters, we want everything in conduit, and we want the conduit separated, and we want different voltage levels and different conduits. Well you can’t do that on a ship. Everything is run in cable tray. [Timestamp: 19:41]
All right, it sounds like the set up on this type of thing would have to be very involved and time-consuming in order to have it come out to be very simple to operate and reconfigure while you are out there on the ship, out of reach of any support or service calls. This has been great having you, Russ and Mark, on part one. In part two, I want to get into the wireless systems and what’s in the control racks and so forth. But I sure appreciate your being here for part one.
Cooper: Our pleasure.
Turpin: Thank you.
Acceptable Use Policy blog comments powered by Disqus