SVC on Twitter    SVC on Facebook    SVC on LinkedIn

Related Articles

Overhauling Florida State Senate’s Sound System, Part 1

Feb 12, 2013 12:06 PM, With Bennett Liles

   Follow us on Twitter    

Quite a bit different than installing in a performance venue, a classroom, or, say, a church situation. I did notice that you used the Danley Sound Labs speakers on this job. Why did you decide to go with those?

Great question. We were really looking for a speaker that provided a very high level of pattern control and vocally was just very natural sounding right out of the box. Danley seemed like a great choice. I’m a big fan of the full-range, horn-loaded concept that puts everything out at the same time and provides a very naturally phased, coherent end result. So that was what we were after, excellent vocal intelligibility, high level of pattern control. It seemed like a great fit. [Timestamp: 7:01]

So this is 7.1 surround, right? What put a surround sound system in a place like a Senate Chamber?

One of the main design objectives was being able to provide good quality AV playback, which to me is surround, or certainly, at least left/center/right. So why don’t I just make it surround and make it great? So we built a system that’s left/center/right, mid-field left and right, and rear-field left and right. Each speaker is individually powered and processed. We added a sub, so we got a low-end, you know; we’ve got a nice low-end support and it just turns out great. So keeping in mind you’ve got the senators in there and they’re all spaced around the room, and in addition to the AV playback, I felt like it would be great to be able to place each of them in the sound field. So the only way to do that is to have that flexibility built into the system, and that was the direction we headed with it. [Timestamp: 8:00]

So there’s a sub in there too.

Yes. We have a sub, a Danley-powered 18in. sub up in the projection room, and so that certainly enhances the AV playback and that’s why it’s there. Or someone coming in to sing with a track, you’ve got a nice, big, full-range sound without having virtually any visible size to it whatsoever. [Timestamp: 8:22]

What particular speakers did you use in there for the left/right and the surrounds?

For the left and right we used the Danley SM-60F. That’s a very compact, very high-powered, 60 by 60, full-range cabinet, and it fit perfectly. We were able to hide that behind the grid work in the lower part of the dome so you don’t even see it. We removed the grille cloth, we did some testing, and there was really minimal effect coming through the metal grid that was already in place. So we were able to hide that and you don’t even see it. Same with the surround speakers. We used the SH-100, which is a 110-degree by 110-degree, full-range horn-loaded product, and so we’ve got two of those in the middle of the room and two of those in the rear of the room. And then each speaker is individually powered and processed, do as well as being an AV playback concept, it also provides us the ability that each one of those speakers can perform just as the main speaker for that particular senator that’s standing over in that part of the room. It really makes the system very conversational because the sound is coming from where the person is actually talking instead of all of the sound coming from the same location up front. We thought that would be a great addition to the room for intelligibility and conversational quality, and the final product really proved to be the case. It’s very neat. [Timestamp: 9:45]

You have a speaker in each individual senator’s desk as well? That’s where a lot of complexity comes in. How does all that work? That’s correct. There’s a speaker in each desk and those were upgraded as well. We found a 5in. speaker, full-range, that goes all the way up to 7K that we were able to get through OAP. So we have 40 of those, one in each desk. Each desk is individually powered and processed, again through the MediaMatrix system, so we can actually control the delay time and the volume balancing of each desk individually. So as a senator stands up and they’re recognized, when they turn their microphone on, the MediaMatrix is programmed to retime align all the desks to that being the center point. It’s just like dropping a pebble in still water and watching the wave go out. So that’s how the sound is all programmed and time delayed. And there again, it’s amazing because you’re sitting there at the desk and you’re hearing this person talking from, let’s say, 40ft. across a room and it’s as conversational as if we’re just right next to each other. That was the goal. We just wanted a really conversational, natural-feeling, unamplified system. [Timestamp: 10:59]

How did you get the center speaker mounted above the Senate president’s desk?

Originally we were hoping to be able to hide that center speaker behind the dome like we were able to with all the other speakers. But once we got into the installation and we were able to determine that unfortunately that would require us to take the entire dome from the top of the ceiling down to the bottom throughout the whole front of the room in order to get to that and be able to pull that out and replace the other one. So obviously that was not an option. So what we did, there’s a projection room on the gallery level, which is like the second story of the Chamber. So we cut a hole in the top of the projection room and installed a new access door and then basically went up on top of the projection room and built a mounting system for the Danley SH-46, which is mounted up there. That’s the main center speaker for the whole system, so it’s mounted right up there. It looks right over the lip, right down on the floor, and it works great. Now that opened up an interesting can of worms because it looks like a speaker. [Timestamp: 12:05]

It looks like a speaker?

Yep. That’s right. A speaker looks like a speaker

What do you mean by “it opened up an interesting can of worms?”

Well, that looking like a speaker, and everybody came in and looked at it and they were like, ‘Oh, it looks like a speaker.’ So we got to figure something out on that. So we all looked at it and thought about it for awhile and determined the best thing to do was to build some custom side panels for it and paint it black and get a black grille cloth and then it would be black instead of white. That was a good call. So that’s what we did. It trimmed out very nicely and ends up looking like a really nice little custom installation for the speaker. [Timestamp: 12:42]

So a little impromptu exercise in creativity. That keeps things interesting. Now where are the amps in the MediaMatrix located?

All of the equipment is mounted in the projection room. [Timestamp: 12:53]

That’s a fairly old building. Were there any electrical grounding issues or, say, power limitations?

The building was built in the mid-70’s. Originally there was only one circuit for everything in the equipment room. So we provided a spreadsheet showing the loads and how much power we needed and how many circuits we needed. Division of Management Services, which does all the building maintenance, they came in and they installed the power for us and got us what we needed. So they were very good to work with on that. [Timestamp: 13:21]

Is there a manual control board somewhere around the clerk’s desk?

Yes there is. The entire system is integrated into a new Crestron system that we also provided, which provides three sound locations. The sound operator room on the second level has one of the Crestron panels in it. There’s a second 12in. touchpanel for sound operation, which connects down on the lower dais, so they can actually be out in the room with that one. And then there’s a 24in. touchpanel in the production desk that also provides a control point for all the sounds. So yeah, they’re well covered as far as different options on where to run things. [Timestamp: 13:59]

Well, Les, that’s a very interesting project and I know it vastly improved the sound for the State Senate there. And in part two we get into the Crestron control and the video system. We’ll see you then.

Acceptable Use Policy
blog comments powered by Disqus

Browse Back Issues
  January 2015 Sound & Video Contractor Cover December 2014 Sound & Video Contractor Cover November 2014 Sound & Video Contractor Cover October 2014 Sound & Video Contractor Cover September 2014 Sound & Video Contractor Cover August 2014 Sound & Video Contractor Cover  
January 2015 December 2014 November 2014 October 2014 September 2014 August 2014