SVC on Twitter    SVC on Facebook    SVC on LinkedIn

Related Articles

 

EAW Introduces UX8800 Dual-Mode Digital Signal Processor

Jul 3, 2007 12:00 PM


   Follow us on Twitter    

More AV in Education news from
The Briefing Room

EAW recently introduced its new UX8800, a 4-input by 8-output digital signal processor that brings the company’s landmark Gunness Focusing technology to an ever-increasing number of conventional EAW loudspeakers. True dual-mode capability makes it equally adept as a loudspeaker processor or an overall system processor.

Gunness Focusing involves the application of sophisticated, custom DSP algorithms designed specifically to correct loudspeaker response anomalies. The result is the elimination of the time smear, horn "honk," and low-frequency cone resonances that plague conventional reinforcement system designs.

In addition, the UX8800 is intimately linked to both EAW Smaart and EAW FChart acoustic measurement and analysis platforms. This is crucial to users and engineers in that it guarantees processing that exactly matches the processor settings determined in the laboratory by EAW engineers.

In the UX8800’s loudspeaker processor mode, the user can establish up to four individual loudspeaker specific processing units, each with locked down product-specific settings for crossover, equalization, alignment processing, and limiting. Output channels are assigned for each of the loudspeaker's separately amplified subsystems. By entering the gain and maximum voltage ratings of the power amplifiers being driven by each output channel, the UX8800 calculates the correct output limiter settings of the individual drivers. In addition, a distance and humidity-dependent air loss pre-emphasis filter can be engaged to overcome expected air losses over longer projection distances.

Also in loudspeaker processing mode, each processing unit offers a full complement of user-adjustable DSP parameters (EQ, level, delay, and polarity). This provides the critical alignment control that is normally required for overall system alignment and adjustment.

In system processor mode, all settings and parameters for both inputs and outputs are user-adjustable. The processor's 4 x 8 architecture is custom-configured by the user to suit the particular application.

The powerful UX8800 digital engine features state-of-the-art 48-bit/96-kHz efficiency. Both input and output connectors are XLR type, with digital inputs to accommodate AES/EBU and the coming EAW U-Net connectivity while eliminating A/D and D/A stages.

The front panel offers access to all operational, user-controllable parameters via buttons, encoders and a brightly back-lit LCD panel. More advanced setup and tailoring can be done via EAW Pilot software (supplied with the unit) on a PC plugged in via the RJ-45 port on the front panel.



Acceptable Use Policy
blog comments powered by Disqus

Browse Back Issues
BROWSE ISSUES
  July 2014 Sound & Video Contractor Cover June 2014 Sound & Video Contractor Cover May 2014 Sound & Video Contractor Cover April 2014 Sound & Video Contractor Cover March 2014 Sound & Video Contractor Cover February 2014 Sound & Video Contractor Cover  
July 2014 June 2014 May 2014 April 2014 March 2014 February 2014